药柱等静压实验和数值模拟计算

陈朗; 鲁建英; 张明; 韩超; 冯长根; 陈朗; 鲁建英; 张明; 韩超; 冯长根

doi:10.11858/gywlxb.2008.02.001

[1]

Huang H J, Zhang D S. The Kinematics Behavior of Plastic Bonded Explosive Molding Powder in Charged [R]. GF-B903960011, 1997.

[2]

黄亨建, 张德三. PBX造型粉在等静压成型过程中的运动行为 [R]. GF-B903960011, 1997.

[3]

Zhang D S. Investigation of Isostatic Pressing Procedure for Explosive JB9014e [J]. Chinese Journal of Explosives Propellants, 1998, (3): 19-21.

[4]

张德三. 等静压成型JB9014e工艺研究 [J]. 火炸药学报, 1998, (3): 19-21.

[5]

SaBmannshausen U, Essig W, Osswald T A. The Density Distribution in Pressed Charges: An Analytical Approach [J]. Propellants, Explosives, Pyrotechnics, 1991, 16(2): 73-80.

[6]

Chen Y. Finite Element Analysis of Stress Distribution in the Explosive Being Mould-Pressed [R]. GF-A0055070G, 1997.

[7]

程源. 炸药耦合热接触问题研究 [R]. GF-A0055070G, 1997.

[8]

LS-DYNA User's Manual(Nonlinear Dynamic Analysis of Structures in Three Dimensions) [Z]. University of California, Lawrence Livermore National Laboratory. Version 960, 2001.