[1] Davis J P. Experimental Measurement of the Principal Isentrope for Aluminum 6061-T6 to 240 GPa [J]. J Appl Phys, 2006, 99(10): 103512.
[2] Hall C A. Isentropic Compression Experiments on the Sandia Z Accelerator [J]. Phys Plasmas, 2000, 7(5): 2069-2075.
[3] Hereil P L, Lassalle F, Avrillaud G. GEPI: An Ice Generator for Dynamic Material Characterization and Hypervelocity Impact [J]. AIP Conference Proceedings, 2004, 706(1): 1209-1212.
[4] Baer M R, Hall C A, Gustavsen R L, et al. Isentropic Loading Experiments of a Plastic Bonded Explosive and Constituents [J]. J Appl Phys, 2007, 101(3): 034906.
[5] Asay J R, Ao T, Vogler T J, et al. Yield Strength of Tantalum for Shockless Compression to 18 GPa [J]. J Appl Phys, 2009, 106(7): 073515.
[6] Vogler T J. On Measuring the Strength of Metals at Ultrahigh Strain Rates [J]. J Appl Phys, 2009, 106(5): 053530.
[7] Vogler T J, Ao T, Asay J R. High-Pressure Strength of Aluminum under Auasi-Isentropic Loading [J]. Int J Plast, 2009, 25(4): 671-694.
[8] Smith R F, Eggert J H, Jankowski A, et al. Stiff Response of Aluminum under Ultrafast Shockless Compression to 110 GPa [J]. Phys Rev Lett, 2007, 98(6): 065701.
[9] Cai J T, Wang G J, Zhao J H, et al. Magnetically Driven Quasi-Isentropic Compression Experiments of Solid Explosives [J]. Chinese Journal of High Pressure Physics, 2010, 24(6): 455-460. (in Chinese)
[10] 蔡进涛, 王桂吉, 赵剑衡, 等. 固体炸药的磁驱动准等熵压缩实验研究 [J]. 高压物理学报, 2010, 24(6): 455-460.
[11] Wang G J, Sun C W, Tan F L, et al. The Compact Capacitor Bank CQ-1. 5 Employed in Magnetically Driven Isentropic Compression and High Velocity Flyer Plate Experiments [J]. Rev Sci Instrum, 2008, 79(5): 053904.
[12] Hayes D B. Backward Integration of the Equations of Motion to Correct for Free Surface Perturbations, SAND2001-1440 [R]. USA: Sandia National Laboratories, 2001.
[13] Steinberg D J, Lund C M. A Constitutive Model for Strain Rates from 10-4 to 106 s-1 [J]. J Appl Phys, 1989, 65(4): 1528-1533.
[14] Mo J J. Calculation of Metallic Compression Isentropes and Study on Isentropic Compression Experiments by Detonation Driving [D]. Mianyang: China Academy of Engineering Physics, 2006: 46-49. (in Chinese)
[15] 莫建军. 金属等熵压缩线计算及爆轰加载等熵压缩实验研究 [D]. 绵阳: 中国工程物理研究院, 2006: 46-49.
[16] Baer M R, Hall C A, Gustavsen R L, et al. Isentropic Loading Experiments of a Plastic Bonded Explosive and Constituents [J]. J Appl Phys, 2007, 101(3): 034906.
[17] Steinberg D J. A Rate-Dependent Constitutive Model for Molybdenum [J]. J Appl Phys, 1993, 74(6): 3827-3831.
[18] Steinberg D J. Constitutive Model Used in Computer Simulation of Time-Resolved, Shock-Wave Data [J]. Int J Impact Eng, 1987, 5(1-4): 603-611.
[19] Tan H. Introduction to Experimental Shock-Wave Physics [M]. Beijing: National Defence Industry Press, 2007. (in Chinese)
[20] 谭华. 实验冲击波物理导引 [M]. 北京: 国防工业出版社, 2007.