[1] AL-HAIK M S, GARMESTANI H, SAVRAN A.  Explicit and implicit viscoplastic models for polymeric composite[J]. International Journal of Plasticity, 2004, 20(10): 1875-1907.   doi: 10.1016/j.ijplas.2003.11.017
[2] KONTOU E, KALLIMANIS A.  Thermo-visco-plastic behaviour of fibre-reinforced polymer composites[J]. Composites Science and Technology, 2006, 66(11/12): 1588-1596.
[3] VALADEZ-GONZALEZ A, CERVANTES-UC J M, OLAYO R, et al.  Chemical modification of henequen fibers with an organosilane coupling agent[J]. Composites Part B: Engineering, 1999, 30(3): 321-331.   doi: 10.1016/S1359-8368(98)00055-9
[4] RAY D, SARKAR B K, RANA A K, et al.  Effect of alkali treated jute fibres on composite properties[J]. Bulletin of Materials Science, 2001, 24(2): 129-135.   doi: 10.1007/BF02710089
[5] MISHRA S, MISRA M, TRIPATHY S S, et al.  Graft copolymerization of acrylonitrile on chemically modified sisal fibers[J]. Macromolecular Materials and Engineering, 2001, 286(2): 107-113.   doi: 10.1002/(ISSN)1439-2054
[6] JOSEPH K, THOMAS S, PAVITHRAN C.  Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites[J]. Polymer, 1996, 37(23): 5139-5149.   doi: 10.1016/0032-3861(96)00144-9
[7] VAN DE WEYENBERG I, IVENS J, DE COSTER A, et al.  Influence of processing and chemical treatment of flax fibres on their composites[J]. Composites Science and Technology, 2003, 63(9): 1241-1246.   doi: 10.1016/S0266-3538(03)00093-9
[8] LEE B H, KIM H J, YU W R.  Fabrication of long and discontinuous natural fiber reinforced polypropylene biocomposites and their mechanical properties[J]. Fibers and Polymers, 2009, 10(1): 83-90.   doi: 10.1007/s12221-009-0083-z
[9] TUNGJITPORNKULL S, SOMBATSOMPOP N.  Processing technique and fiber orientation angle affecting the mechanical properties of E-glass fiber reinforced wood/PVC composites[J]. Journal of Materials Processing Technology, 2009, 209(6): 3079-3088.   doi: 10.1016/j.jmatprotec.2008.07.021
[10] LI X, PANIGRAHI S, TABIL L G.  A study on flax fiber-reinforced polyethylene biocomposites[J]. Applied Engineering in Agriculture, 2009, 25(4): 525-531.   doi: 10.13031/2013.27454
[11] SHOKRIEH M M, OMIDI M J.  Tension behavior of unidirectional glass/epoxy composites under different strain rates[J]. Composite Structures, 2009, 88(4): 595-601.   doi: 10.1016/j.compstruct.2008.06.012
[12] HARGITAI H, RÁCZ I, ANANDJIWALA R D.  Development of hemp fiber reinforced polypropylene composites[J]. Journal of Thermoplastic Composite Materials, 2008, 21(2): 165-174.   doi: 10.1177/0892705707083949
[13] FACCA A G, KORTSCHOT M T, YAN N.  Predicting the tensile strength of natural fibre reinforced thermoplastics[J]. Composites Science and Technology, 2007, 67(11/12): 2454-2466.   doi: 10.1016/j.compscitech.2006.12.018
[14] AHMAD I, BAHARUM A, ABDULLAH I.  Effect of extrusion rate and fiber loading on mechanical properties of Twaron fiber-thermoplastic natural rubber (TPNR) composites[J]. Journal of Reinforced Plastics and Composites, 2006, 25(9): 957-965.   doi: 10.1177/0731684406065082
[15] SAIN M, SUHARA P, LAW S, et al.  Interface modification and mechanical properties of natural fiber-polyolefin composite products[J]. Journal of Reinforced Plastics and Composites, 2005, 24(2): 121-130.   doi: 10.1177/0731684405041717
[16] 曾广胜, 徐成, 林瑞珍, 等.  植物纤维增强聚丙烯复合材料力学性能的研究[J]. 包装学报, 2011, 3(1): 44-47.   doi: 10.3969/j.issn.1674-7100.2011.01.011
ZENG G S, XU C, LIN R Z, et al.  Exploration of mechanical performances of fiber reinforced PP composites[J]. Packaging Journal, 2011, 3(1): 44-47.   doi: 10.3969/j.issn.1674-7100.2011.01.011
[17]

WANG L L. Foundation of stress wave [M]. Oxford, UK: Elsevier, 2007: 17–22.

[18] 申海艇, 蒋招秀, 王贝壳, 等.  基于超高速相机的数字图像相关性全场应变分析在SHTB实验中的应用[J]. 爆炸与冲击, 2017, 37(1): 15-20.   doi: 10.11883/1001-1455(2017)01-0015-06
SHEN H T, JIANG Z X, WANG B K, et al.  Full field strain measurement in split Hopkinson tension bar experiments by using ultra-high-speed camera with digital image correlation[J]. Explosion and Shock Waves, 2017, 37(1): 15-20.   doi: 10.11883/1001-1455(2017)01-0015-06