[1] CAMANHO P P, DAVILA C G, DE MOURA M F.  Numerical simulation of mixed-mode progressive delamination in composite materials[J]. Journal of Composite Materials, 2003, 37(16): 1415-1438.   doi: 10.1177/0021998303034505
[2] SU X, YANG Z, LIU G.  Finite element modelling of complex 3D static and dynamic crack propagation by embedding cohesive elements in Abaqus[J]. Acta Mechanica Solida Sinica, 2010, 23(3): 271-282.   doi: 10.1016/S0894-9166(10)60030-4
[3] XU J, LI Y.  Crack analysis in PVB laminated windshield impacted by pedestrian head in traffic accident[J]. International Journal of Crashworthiness, 2009, 14(1): 63-71.   doi: 10.1080/13588260802462427
[4] PENG Y, YANG J, DECK C, et al.  Finite element modeling of crash test behavior for windshield laminated glass[J]. International Journal of Impact Engineering, 2013, 57: 27-35.   doi: 10.1016/j.ijimpeng.2013.01.010
[5] CHEN S, ZANG M, XU W.  A three-dimensional computational framework for impact fracture analysis of automotive laminated glass[J]. Computer Methods in Applied Mechanics and Engineering, 2015, 294: 72-99.   doi: 10.1016/j.cma.2015.06.005
[6] PELFRENE J, DAM S V.  Numerical analysis of the peel test for characterisation of interfacial debonding in laminated glass[J]. International Journal of Adhesion & Adhesives, 2015, 62: 146-153.
[7] GAO W, XIANG J, CHEN S, et al.  Intrinsic cohesive modeling of impact fracture behavior of laminated glass[J]. Materials & Design, 2017, 127: 321-335.
[8] RAVICHANDAR K, YANG B.  On the role of microcracks in the dynamic fracture of brittle materials[J]. Journal of the Mechanics & Physics of Solids, 1997, 45(4): 535-563.
[9] PARAMESWARAN V, SHUKLA A.  Crack-tip stress fields for dynamic fracture in functionally gradient materials[J]. Mechanics of Materials, 1999, 31(9): 579-596.   doi: 10.1016/S0167-6636(99)00025-3
[10] RAHUL-KUMAR P, JAGOTA A, BENNISON S J, et al.  Polymer interfacial fracture simulations using cohesive elements[J]. Acta Materialia, 1999, 47(15/16): 4161-4169.
[11] CHEN S, ZANG M, WANG D, et al.  Numerical analysis of impact failure of automotive laminated glass: a review[J]. Composites Part B: Engineering, 2017, 122: 47-60.   doi: 10.1016/j.compositesb.2017.04.007
[12] GOUTIANOS S, SØRENSEN B F.  Path dependence of truss-like mixed mode cohesive laws[J]. Engineering Fracture Mechanics, 2012, 91: 117-132.   doi: 10.1016/j.engfracmech.2012.02.011
[13] BENZEGGAGH M, KENANE M.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus[J]. Composites Science and Technology, 1996, 56(4): 439-449.   doi: 10.1016/0266-3538(96)00005-X
[14] LEE T W.  The energy release rate for two-dimensional crack problems with centrifugal loads[J]. Engineering Fracture Mechanics, 1995, 51(5): 741-752.   doi: 10.1016/0013-7944(94)00308-5
[15] PELFRENE J, KUNTSCHE J, VAN DAM S, et al.  Critical assessment of the post-breakage performance of blast loaded laminated glazing: experiments and simulations[J]. International Journal of Impact Engineering, 2016, 88: 61-71.   doi: 10.1016/j.ijimpeng.2015.09.008
[16] XU J, LI Y, GE D, et al.  Experimental investigation on constitutive behavior of PVB under impact loading[J]. International Journal of Impact Engineering, 2011, 38(2): 106-114.