[1] 郭美芳, 范宁军.  多模式战斗部与起爆技术分析研究[J]. 探测与控制学报, 2005, 27(1): 31-34.   doi: 10.3969/j.issn.1008-1194.2005.01.009
GUO M F, FAN N J.  The study on a multimode warhead and the initiation technology[J]. Journal of Detection and Control, 2005, 27(1): 31-34.   doi: 10.3969/j.issn.1008-1194.2005.01.009
[2] 谭多望, 孙承纬.  成型装药研究新进展[J]. 爆炸与冲击, 2008, 28(1): 50-56.   doi: 10.3321/j.issn:1001-1455.2008.01.009
TAN D W, SUN C W.  Progress in studies on shaped charge[J]. Explosion and Shock Waves, 2008, 28(1): 50-56.   doi: 10.3321/j.issn:1001-1455.2008.01.009
[3]

BENDER D, FONG R, NG W, et al. Dual mode warhead technology for future smart munitions [C]//19th International Symposium on Ballistics. Interlaken, Switzerland: Casino Kursaal Congress Center, 2001: 679–684.

[4]

ARNOLD W, GRASWALD M, ROTTENKOLBER E. A novel technology for switchable modes warheads [C]//26th International Symposium on Ballistics. Miami, Florida, USA, 2011.

[5] LI W B, WANG X, LI W B, et al.  Research on the optimum length-diameter ratio of the charge of a multimode warhead[J]. Shock Waves, 2012, 22(3): 265-274.   doi: 10.1007/s00193-012-0365-z
[6] 纪冲, 龙源, 余道强, 等.  切割式双模战斗部毁伤元成型及侵彻钢靶特性研究[J]. 高压物理学报, 2012, 26(5): 508-516.   doi: 10.11858/gywlxb.2012.05.005
JI C, LONG Y, YU D Q, et al.  Experimental and numerical study on the formation and penetration properties of dual-mode warhead[J]. Chinese Journal of High Pressure Physics, 2012, 26(5): 508-516.   doi: 10.11858/gywlxb.2012.05.005
[7] 杨亚东, 陈智刚.  起爆方式对杆式射流形成影响的数值模拟研究[J]. 弹箭与制导学报, 2008, 28(5): 89-91.   doi: 10.3969/j.issn.1673-9728.2008.05.027
YANG Y D, CHEN Z G.  Numerical simulation of jetting penetrator charge formation under different initiation ways[J]. Journal of Projectiles, Rocket, Missiles and Guidance, 2008, 28(5): 89-91.   doi: 10.3969/j.issn.1673-9728.2008.05.027
[8]

樊菲. 实现杆流与射流转换的研究 [D]. 南京: 南京理工大学, 2012.

FAN F. Research on achieving the conversion of JPC and JET [D]. Nanjing: Nanjing University of Science and Technology, 2012.

[9] 李伟兵, 樊菲, 王晓鸣, 等.  杆式射流与射流转换的双模战斗部优化设计[J]. 兵工学报, 2013, 34(12): 1500-1505.   doi: 10.3969/j.issn.1000-1093.2013.12.003
LI W B, FAN F, WANG X M, et al.  Optimal design of dual mode warhead for jetting penetrator and jet conversion[J]. Acta Armamentarii, 2013, 34(12): 1500-1505.   doi: 10.3969/j.issn.1000-1093.2013.12.003
[10] 樊雪飞, 李伟兵, 王晓鸣, 等.  爆轰驱动钽药型罩形成双模毁伤元仿真与试验研究[J]. 兵工学报, 2017, 38(10): 1918-1925.   doi: 10.3969/j.issn.1000-1093.2017.10.006
FAN X F, LI W B, WANG X M, et al.  Simulation and experimental study of tantalum liner to form dual-mode damage element by detonation[J]. Acta Armamentraii, 2017, 38(10): 1918-1925.   doi: 10.3969/j.issn.1000-1093.2017.10.006
[11] FU J P, CHEN Z G, HOU X C, et al.  Simulation and experimental investigation of jetting penetrator charge at large stand-off distance[J]. Defence Technology, 2013, 9(2): 117-124.
[12] LI W B, WANG X M, LI W B.  The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator[J]. International Journal of Impact Engineering, 2010, 37(4): 414-424.   doi: 10.1016/j.ijimpeng.2009.08.008