[1]

MATHEWS W. Services test spray-on vehicle armor [N]. Army Times, 2004–05–03.

[2] 宋彬, 黄正祥, 翟文, 等.  聚脲弹性体夹芯防爆罐抗爆性能研究[J]. 振动与冲击, 2016, (7): 138-144.
SONG B, HUANG Z X, ZHAI W, et al.  Anti-detonation properties of explosion-proof pots made of sandwich structures with polyurea elastomer[J]. Journal of Vibration and Shock, 2016, (7): 138-144.
[3] 甘云丹, 宋力, 杨黎明.  弹性体涂覆钢板抗冲击性能的数值模拟[J]. 兵工学报, 2016, (S2): 15-18.
GAN Y D, SONG L, YANG L M.  Numerical simulation for anti-blast performances of steel plate coated with elastomer[J]. Acta Armamentarii, 2016, (S2): 15-18.
[4] BAHEI-EI-DIN Y A, DVORAK G J, FREDRICKSEN O J.  A blast-tolerant sandwich plate design with a polyurea interlayer[J]. International Journal of Solids and Structures, 2006, 43(25/26): 7644-7658.   doi: 10.1016/j.ijsolstr.2006.03.021
[5] AMINI M R, SIMON J, NEMAT-NASSER S.  Numerical modeling of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments[J]. Mechanics of Materials, 2010, 42(6): 628-639.   doi: 10.1016/j.mechmat.2009.09.008
[6] 赵鹏铎, 张鹏, 张磊, 等.  聚脲涂覆钢板结构抗爆性能试验研究[J]. 北京理工大学学报, 2018, 38(2): 118-123.
ZHAO P D, ZHANG P, ZHANG L, et al.  Experimental investigation on the performance of polyurea-coated structure under blast loads[J]. Transactions of Beijing Institute of Technology, 2018, 38(2): 118-123.
[7] TEKALUR S A, SHUKLA A, SHIVAKUMAR K.  Blast resistance of polyurea based layered composite materials[J]. Composite Structures, 2008, 84(3): 271-281.   doi: 10.1016/j.compstruct.2007.08.008
[8] LEBLANC J, SHUKLA A.  Response of polyurea-coated flat composite plates to underwater explosive loading[J]. Journal of Composite Materials, 2015, 49(8): 965-980.   doi: 10.1177/0021998314528263
[9] ACKLAND K, ANDERSON C, NGO T D.  Deformation of polyurea-coated steel plates under localised blast loading[J]. International Journal of Impact Engineering, 2013, 51: 13-22.   doi: 10.1016/j.ijimpeng.2012.08.005
[10] XUE L, MOCK W, BELYTSCHKO T.  Penetration of DH-36 steel plates with and without polyurea coating[J]. Mechanics of Materials, 2010, 42(11): 981-1003.   doi: 10.1016/j.mechmat.2010.08.004
[11]

HALLQUIST J O. LS-DYNA keyword user’s manual [M]. Livermore Software Technology Corporation, 2007.

[12] LIU X R, TIAN X G, LU T J, et al.  Blast resistance of sandwich-walled hollow cylinders with graded metallic foam cores[J]. Composite Structures, 2012, 94(8): 2485-2493.   doi: 10.1016/j.compstruct.2012.02.029