[1] SHIM J, MOHR D.  Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain rates[J]. International Journal of Impact Engineering, 2009, 36(9): 1116-1127.   doi: 10.1016/j.ijimpeng.2008.12.010
[2] SHIM J, MOHR D.  Rate dependent finite strain constitutive model of polyurea[J]. International Journal of Plasticity, 2011, 27(6): 868-886.   doi: 10.1016/j.ijplas.2010.10.001
[3]

黄微波.喷涂聚脲弹性体技术[M].北京: 化学工业出版社, 2005.

[4] ROLAND C M, FRAGIADAKIS D, GAMACHE R M.  Elastomer–steel laminate armor[J]. Composite Structures, 2010, 92(5): 1059-1064.   doi: 10.1016/j.compstruct.2009.09.057
[5] YI J, BOYCE M C, LEE G F, et al.  Large deformation rate-dependent stress–strain behavior of polyurea and polyurethanes[J]. Polymer, 2006, 47(1): 319-329.   doi: 10.1016/j.polymer.2005.10.107
[6] SARVA S S, DESCHANEL S, BOYCE M C, et al.  Stress–strain behavior of a polyurea and a polyurethane from low to high strain rates[J]. Polymer, 2007, 48(8): 2208-2213.   doi: 10.1016/j.polymer.2007.02.058
[7] PATHAK J A, TWIGG J N, NUGENT K E, et al.  Structure evolution in a polyurea segmented block copolymer because of mechanical deformation[J]. Macromolecules, 2008, 41(20): 7543-7548.   doi: 10.1021/ma8011009
[8] 甘云丹, 宋力, 杨黎明.  弹性体涂覆钢板抗冲击性能的数值模拟[J]. 兵工学报, 2009, 30(2): 15-18.
GAN Y D, SONG L, YANG L M.  Numerical simulation for anti-blast performances of steel plate coated with elastomer[J]. Acta Armamentarii, 2009, 30(2): 15-18.
[9] 宋彬, 黄正祥, 翟文, 等.  聚脲弹性体夹芯防爆罐抗爆性能研究[J]. 振动与冲击, 2016, 35(7): 138-144.
SONG B, HUANG Z X, ZHAI W, et al.  Anti-detonation properties of explosion-proof pots made of sandwich structures with polyurea elastomer[J]. Journal of Vibration and Shock, 2016, 35(7): 138-144.
[10] 侯海量, 朱锡, 谷美邦, 等.  破片模拟弹侵彻钢板的有限元分析[J]. 海军工程大学学报, 2006, 18(3): 78-83.   doi: 10.3969/j.issn.1009-3486.2006.03.019
HOU H L, ZHU X, GU M B, et al.  Investigation on penetration of steel plate by fragment simulated projectile using finite element method[J]. Journal of Naval University of Engineering, 2006, 18(3): 78-83.   doi: 10.3969/j.issn.1009-3486.2006.03.019
[11] 邓云飞, 张伟, 孟凡柱, 等.  Q235钢单层板对平头刚性弹抗穿甲特性研究[J]. 振动与冲击, 2015, 43(2): 74-78.
DENG Y F, ZHANG W, MENG F Z, et al.  Ballistic resistance of Q235 steel monolithic plates impacted by rigid blunt-nosed projectiles[J]. Journal of Vibration and Shock, 2015, 43(2): 74-78.
[12] AMIRKHIZI A V, ISAACS J, MCGEE J, et al.  An experimentally-based viscoelastic constitutive model for polyurea, including pressure and temperature effects[J]. Philosophical Magazine, 2006, 86(36): 5847-5866.   doi: 10.1080/14786430600833198
[13] RECHT R F, IPSON T W.  Ballistic perforation dynamics[J]. Journal of Applied Mechanics, 1963, 30(3): 384-390.   doi: 10.1115/1.3636566