一种隔热弹衣对弹体装药反应的影响

王洪波; 牛公杰; 钱立新; 魏雪婷; 卢永刚; 路中华; 张中礼; 张鹤

doi:10.11858/gywlxb.20170575

一种隔热弹衣对弹体装药反应的影响

doi: 10.11858/gywlxb.20170575

1.
中国工程物理研究院总体工程研究所, 四川绵阳 621999
2.
中国工程物理研究院化工材料研究所, 四川绵阳 621999
3.
内蒙合成化工研究所, 内蒙古呼和浩特 010010

基金项目:

国家自然科学基金 11672278

中国工程物理研究院安全弹药中心自主课题 2015-ZZ-SJ-B01

详细信息

作者简介:
王洪波(1986-), 硕士, 工程师, 主要从事常规武器研制研究.E-mail:414wanghb@caep.cn

中图分类号: O381;TJ55
计量
- 文章访问数: 6691
- HTML全文浏览量: 3386
- PDF下载量: 234
出版历程
- 收稿日期: 2017-05-03
- 修回日期: 2017-05-22

Influence of Thermal Protection Coat on the Reaction of Explosives in Projectile

1.
Institute of System Engineering, China Academy of Engineering Physics, Mianyang 621999, China
2.
Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang 621999, China
3.
Inner-Mongolia Synthetic Chemical Research Institute, Hohhot 010010, China

摘要

摘要: 采用烤燃试验研究了一种隔热弹衣对弹体装药反应的影响。通过对比包覆隔热弹衣试验件和无隔热弹衣试验件火烧后的反应状态，发现隔热弹衣对弹体装药反应等级没有明显影响，但可有效延迟装药热点火反应时间达32min，为火灾环境下弹药救援处置赢得时间。进一步分析发现，隔热弹衣的热防护效果不仅与其自身的低导热性有关，也与隔热弹衣和弹体之间的空气间隙有关。
- 装药 /
- 隔热弹衣 /
- 烤燃试验 /
- 反应等级
Abstract: In this work, we researched the influence of a kind of thermal protection coat on the reaction of explosives in projectile by fast cook-off test.Based on the comparison of the reaction state of the test sample with and without the thermal protection coat, the results show that the thermal protection coat had little influence on the test sample's reaction intensity, and delayed the explosives' ignition reaction time by 32 min.The thermal protection coat can obviously win more time for the ammunition succor in fire accidents.Furthermore, the protective effect of the thermal protection coat is related with its own heat-conducting property and the airy space between the coat and the sample protected.
- explosive /
- thermal protection coat /
- cook-off test /
- reaction intensity

HTML全文

图 1 试验件结构简图

Figure 1. Configuration of test sample

下载: 全尺寸图片幻灯片

图 2 试验件照片

Figure 2. Pictures of test sample

下载: 全尺寸图片幻灯片

图 3 无隔热弹衣试验件摆放状态及其外侧火焰温度测点布置

Figure 3. Placement of test samplewithout thermal protection coat anddistribution of monitors

下载: 全尺寸图片幻灯片

图 4 无隔热弹衣试验件外侧火焰温度监测点分布及其温度变化

Figure 4. Distribution of monitors and their measured temperature of test samplevs. time without thermal protection coat

下载: 全尺寸图片幻灯片

图 5 试验件破坏状态

Figure 5. Damage state of test sample

下载: 全尺寸图片幻灯片

图 6 包覆隔热弹衣试验件的摆放状态

Figure 6. Placement of test sample withthermal protection coat

下载: 全尺寸图片幻灯片

图 7 包覆隔热弹衣试验件外侧火焰温度监测点分布及其温度变化

Figure 7. Distribution of monitors and their measured temperature of flamevs. time with thermal protection coat

下载: 全尺寸图片幻灯片

图 8 试验件在油池中火烧过程序列图

Figure 8. Fast cook-off state pictures of test sample with thermal protection coat in flame

下载: 全尺寸图片幻灯片

图 9 隔热弹衣内表面、弹体外表面监测点分布及其温度变化

Figure 9. Distribution of monitors and their measured temperature inside thermal protection coat varying with time

下载: 全尺寸图片幻灯片

图 10 试验件尾部由外而内测点温度随时间的变化

Figure 10. Temperature of monitors vs. time fromoutside to inside at the end of test sample

下载: 全尺寸图片幻灯片

图 11 包覆隔热弹衣试验件破坏状态

Figure 11. Damage state of test sample with thermal protection coat

下载: 全尺寸图片幻灯片

参考文献(11)

[1]	张蕊, 冯长根, 陈朗.弹药的热烤(Cook-off)实验[J].火工品, 2002(4):37-39. http://www.oalib.com/paper/4863289 ZHANG R, FENG C G, CHEN L.Cook-off test of ammunition[J].Initiators and Pyrotechnics, 2002(4):37-39. http://www.oalib.com/paper/4863289
[2]	Guidance on the assessment and development of insensitive munitions (IM): AOP-39: Edition 3[S]. Allied Ordnance Publication, 2010.
[3]	WALLS T. General purpose bomb fast cook-off mitigation techniques[C]//Insensitive Munitions & Energetic Materials Technology Symposium. Germany, Munich, 2010.
[4]	KELLEY S, CENTER A A, DIRECTORATE A. Venting techniques for penetrator warheads[C]//Insensitive Munitions & Energetic Materials Technology Symposium. Munich, Germany, 2010.
[5]	DELRIEU L, RÉGNAUT S, NOUGUEZ B. New French IM 500lb bombs[C]//Insensitive Munitions & Energetic Materials Symposium. Munich, Germany, 2010.
[6]	Hazard assessment tests for non-nuclear munitions (AMSC N6037): MIL-STD-2105D[S]. 2011.
[7]	DELRIEU L, RÉGNAUT S, NOUGUEZ B. New French IM GP bombs development update[C]//Insensitive Munitions & Energetic Materials Symposium, 2012.
[8]	钱立新, 梁斌, 牛公杰. 不敏感弹药安全要求及设计技术[C]//2014年(第六届)含能材料与钝感弹药技术研讨会. 四川成都, 2014. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-HNCL201411001024.htm QIAN L X, LIANG B, NIU G J. The requirements of insensitive munitions and design techniques[C]//Energetic Materials & Insensitive Munitions Symposium. Chengdu, Sichuan, 2014. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-HNCL201411001024.htm
[9]	梁斌, 钱立新, 牛公杰. 常规弹药热缓解技术研究初步分析[C]//2014年(第六届)含能材料与钝感弹药技术研讨会. 四川成都, 2014. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-HNCL201411001047.htm LIANG B, QIAN L X, NIU G J. Review of mitigation for pressure and thermal threats using devices[C]//Energetic Materials & Insensitive Munitions Symposium. Chengdu, Sichuan, 2014. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-HNCL201411001047.htm
[10]	牛公杰, 钱立新, 梁斌, 等. 端部具有压力缓解结构的弹体装药快烤试验研究[C]//2016年(第七届)含能材料与钝感弹药技术研讨会. 海南海口, 2016. NIU G J, QIAN L X, LIANG B, et al. Experimental study on the fast cook-off of ammunition with pressure mitigation structure at head[C]//Energetic Materials & Insensitive Munitions Symposium. Haikou, Hainan, 2016.
[11]	Policy for introduction and assessment of insensitive munitions (IM): STANAG 4439: Edition 3[S]. NATO Standardization Agency, 2010.